Cara
Cross-linked hyaluronic acid dermal filler range · Cara Soft, Mild, Hard and Ultra · Hy-BRID technology · GENOSS Co., Ltd., South Korea.
Price range: $25.00 through $32.90
You save
- Cross-linked hyaluronic acid filler range
- Soft, Mild, Hard and Ultra gels
- Hy-BRID cross-linking technology
- Clear, colourless gel that gets denser from Soft to Ultra
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.
(+82) 10 7364 7998 Send a message on WhatsApp.
Cara: hyaluronic acid fillers from soft to ultra
Cara is a range of cross-linked hyaluronic acid (HA) dermal fillers. Distributor listings name GENOSS Co., Ltd., a South Korean company, as the maker, and describe the range as made with Hy-BRID technology, which is intended to give the gel good viscoelasticity. The gel is clear and colourless, and gets denser from Soft to Ultra.
This listing carries four gels. Soft is injected superficially for shallow lines and early wrinkles. Mild is placed in the upper layer and the mid-subcutaneous layer for moderate wrinkles. Hard is injected into the mid-to-deep dermal layers and is used for lip volume and perioral lines. Ultra is the densest gel and is placed deeper for deep-set wrinkles and soft tissue augmentation.
Distributor listings give the HA concentration as 24 mg/mL with 0.3% lidocaine, but syringe volume is quoted as both 1.0 and 1.1 mL, so check the carton for the gel you receive. Select the gel you need using the options above the add-to-cart button, and check the price shown for each option.
The lightest gel, injected superficially for shallow lines and early wrinkles.
Mild for moderate wrinkles. Hard for lip volume and perioral lines.
The densest gel, for deep-set wrinkles and soft tissue augmentation.
The manufacturer's cross-linking technology for the range.
Why practitioners choose Cara
Soft, Mild, Hard and Ultra cover shallow lines, moderate wrinkles, lips and deeper augmentation from one Korean product family.
Distributor listings describe Hy-BRID cross-linking, which is intended to give the gel good viscoelasticity.
The gel is clear and colourless, and each formula has a different density to match the depth of the area.
Distributor listings cite 30G for Soft, 27G for Mild and 25G or 27G for Hard and Ultra, so each gel is used with a needle suited to its density.
The gel is biodegradable, so the body gradually breaks it down. Hyaluronidase is available to dissolve HA fillers if needed.
Treatment areas and indications
Areas where the gels in the Cara range are used. Approved indications and age limits differ by market, so follow the instructions for use for the gel and your country.
Superficial lines, injected superficially.
Lines in the upper layer and the mid-subcutaneous layer.
Lip volume and lines around the mouth.
Deeper wrinkles that need a denser gel.
Volume and structure in the mid-face.
Cara gels are medical devices for injection. Which indications are permitted and what training is required are set by the regulatory framework where you practise. Korea Filler Experts supplies the product. Nothing here is a recommendation to treat any medical condition, and nothing here replaces manufacturer training.
What is inside Cara
| Product type | Cross-linked hyaluronic acid dermal filler |
| Hyaluronic acid | Cross-linked HA, 24 mg/mL (distributor listings; check the carton) |
| Lidocaine | 0.3% (distributor listings; check the carton) |
| Gels on this listing | Soft, Mild, Hard, Ultra |
| Technology | Hy-BRID cross-linking |
| Texture | Clear, colourless gel; density rises from Soft to Ultra |
| Needle (distributor listings) | Soft 30G, Mild 27G, Hard and Ultra 25G or 27G |
| Storage | As stated on the carton; do not freeze; protect from direct sunlight |
| Manufacturer | GENOSS Co., Ltd., South Korea |
Before you order
- Choose the variation (Soft, Mild, Hard or Ultra) before adding to your cart, and check the price shown for each.
- Check the lot number and expiry on the carton against the syringe.
- We do not dispatch stock with under 6 months of shelf life remaining unless agreed in advance.
- Check the ingredient list and syringe volume on the carton before you plan treatment.
- Indications and approvals differ by country, so confirm what you may import and use where you practise.
What each component does
Cross-linked hyaluronic acid
Hyaluronic acid is a sugar found naturally in skin, where it binds water. In a filler it is cross-linked so that it lasts longer than natural HA before the body breaks it down. Distributor listings give Cara as 24 mg/mL, and the four gels differ in density.
Lidocaine
Distributor listings give 0.3% lidocaine hydrochloride, a local anaesthetic, for comfort during injection. Screen patients for lidocaine allergy, and check the carton to confirm the ingredients and the syringe volume of the gel you receive.
Hy-BRID
Hy-BRID is the name of the cross-linking technology used for the range. This is the description given in distributor listings, and we do not hold independent data on it.
Which gel for which area
- Soft: shallow lines and early wrinkles, injected superficially.
- Mild: moderate wrinkles, injected into the upper layer and the mid-subcutaneous layer.
- Hard: lip volume and perioral lines, injected into the mid-to-deep dermal layers.
- Ultra: deep-set wrinkles and soft tissue augmentation, injected into deeper layers.
Approved indications differ by market. Confirm them in the instructions for use for your country.
How it works
The gel is placed in the skin or deeper tissue, where it adds volume mechanically and binds water. The cross-linking slows its breakdown, and the body gradually absorbs it over months.
How Cara is used
Reference information for trained practitioners. The manufacturer’s instructions for use for the specific gel and your training take precedence over this page.
Step by step
-
Assess and consent
Review medical history, allergies (including to lidocaine), medication, bleeding risk, previous fillers and the patient’s goals. Explain the expected result, the risks and the possibility of needing hyaluronidase.
-
Choose the gel
Select Soft, Mild, Hard or Ultra according to the area, depth and result needed, following the instructions for use.
-
Prepare the skin
Remove make-up and cleanse. Mark the treatment area and apply topical anaesthetic if required.
-
Inspect the syringe
Check the packaging, seal and expiry. Use the sterile needle supplied or a needle or cannula recommended in the instructions for use.
-
Inject as taught
Soft is injected superficially, Mild into the upper layer and mid-subcutaneous layer, Hard into the mid-to-deep dermal layers and Ultra into deeper layers, using the technique in the instructions for use and your training. Inject slowly and with low pressure, and stop at once if the patient reports unexpected pain or you see blanching.
-
Review
Assess the result, mould gently if the technique requires it, and plan any review according to the gel used and the area treated. Volume effects are visible straight after injection.
Administration notes
Know the risks of the area. Filler can cause vascular occlusion. Practitioners should know the anatomy of the area, recognise the signs early and have hyaluronidase and an emergency protocol immediately available.
- Single use. One syringe, one patient. Discard any remainder with the needle.
- Do not inject into infected, inflamed or broken skin.
- Do not use in patients allergic to hyaluronic acid or lidocaine.
- Dispose of needles into a sharps container in line with local clinical waste rules.
After treatment
- Redness, swelling, tenderness and bruising are common and settle within days
- Avoid strenuous exercise, heat, saunas and alcohol for about 24 to 48 hours
- Seek urgent review for severe pain, blanching, skin colour change, visual change or a lump that grows or becomes tender
Storing and handling Cara
Store as stated on the carton and in the instructions for use. Do not freeze. Protect from direct sunlight.
Keep the syringe in its original sterile packaging until use. Check the seal and expiry. Do not use if the packaging is damaged.
Single patient, single session. Discard the syringe and needle after use.
Do not use if the packaging is damaged or the expiry date has passed. Dispose of used syringes and needles as clinical waste in line with local requirements.
What's included with Cara
Ask us if you need the exact pack contents, syringe volume and lidocaine content of the gel before you order. Topical anaesthetic and hyaluronidase are not supplied.
Cara — frequently asked questions
What is Cara?
A range of cross-linked hyaluronic acid dermal fillers made with Hy-BRID technology, which distributor listings attribute to MAS Co, Ltd. in South Korea. This listing carries Soft, Mild, Hard and Ultra.
What is the difference between Soft, Mild, Hard and Ultra?
Each gel has a different density. Soft is for shallow lines and early wrinkles, injected superficially. Mild is for moderate wrinkles in the upper and mid-subcutaneous layers. Hard is for lip volume and perioral lines. Ultra is the densest, for deep-set wrinkles and soft tissue augmentation.
Does Cara contain lidocaine?
Distributor listings give 0.3% lidocaine. Check the ingredient list on the carton for the gel you receive, or ask us before you order.
How long do the results last?
Distributor listings give about 6 to 12 months for Soft and about 12 to 24 months for Ultra, with the denser gels lasting longer. Duration varies with the gel, the injection depth, the area and the patient, so treat these as manufacturer-style figures.
Can it be dissolved?
Yes. Hyaluronic acid fillers can be broken down with hyaluronidase. Practitioners should have it available.
How is it stored?
As stated on the carton and in the instructions for use. Do not freeze it, and keep it away from direct sunlight.
Who can buy and use this product?
Dermal fillers are for administration by licensed healthcare practitioners trained in injection technique. We supply qualified professionals and do not sell to consumers.
Customer Reviews
Share your experience with this product. Your honest review helps other customers make better choices.
- Sort By
- Newest
- Oldest
- Highest Rating
- Lowest Rating
First time with Cara and this was a pleasant surprise. Putting it on the reorder list.
Needed to change the quantity before dispatch and the team sorted it out for me. Easy purchase from beginning to end.
Actually really nice! I bought it just to try something new and would definitely consider ordering again.
First time trying Cara and overall I was pleasantly surprised. It gave us enough definition for the area we treated, and everything looked much softer once it settled.
No big story here, it simply did what we needed it to do. Nice outcome once settled and no problems with the order. I'd use it again for the right indication.
This was recommended by my practitioner, and I'm glad I gave it a try. Delivery was quick, everything arrived sealed properly, and the treatment went very smoothly.
My clinic recommended trying this product, and I'm glad I did. Everything arrived on time, and the injector had no issues during the procedure.
This was my first time ordering Cara, and customer service helped me choose the appropriate option for my treatment plan. The shipment arrived sooner than expected, with no crushed corners or damaged seals. My practitioner was satisfied with the handling and final finish.
Copyright 2026 © Korea Filler Experts. All right reserved.
