NEO Multi Thread: Triple (Three Twisted Thread)
Polydioxanone (PDO) triple thread · three filaments per needle · 23G to 26G. 20 pieces per pack.
$48.90
You save
Neo Multi Thread Triple PDO is a polydioxanone threads based on three filaments used for the thread deep lifting of face and neck as well as face bio reinforcement. Polydioxanone (PDO) is a flexible polymer, which remains intact in the injection point up to 6 months. Threads created based on PDO exhibit multiple effects: their subcutaneous injection initiates skin self-regeneration by increasing collagen synthesis and improving blood microcirculation. As a result of the application of polydioxanone threads the significant lifting effect is observed accompanied by wrinkles elimination, small skin imperfections diminishment, as well as elasticity improvement.
Types example :
| Model Code | Needle Size | Needle Length | Threads Length | USP |
| M3112 | 31G | 12mm | 16mm | 7-0 |
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.
(+82) 10 7364 7998 Send a message on WhatsApp.
Three PDO filaments for maximum stimulus per pass
NEO Triple Thread carries three polydioxanone filaments on a single needle. It is the densest needle-delivered smooth thread in the NEO range — roughly three times the material of a mono thread, placed through one insertion.
The case for it is efficiency in areas that need substantial collagen stimulation. Where a mono mesh would mean thirty passes and the bruising that comes with them, a triple achieves comparable total material in ten. In thicker tissue that tolerates the bulk, that trade is usually worth making.
It does not lift. All three filaments are smooth. This is the point at which practitioners most often assume that enough material must eventually produce mechanical support — it does not. Three smooth threads grip exactly as well as one, which is to say not at all. Repositioning requires barbs.
Roughly triple the PDO of a mono thread through a single insertion — a third of the passes for the same material.
The two 25G codes pair two 7-0 strands with a 6-0 rather than three matched filaments.
23G to 26G. Three filaments need more bore, so this is not a fine-skin product.
No barbs. More material than any other needle-delivered smooth thread here, and still no lift.
Why practitioners stock NEO Triple Thread
The densest needle-delivered smooth option in the range. Where substantial stimulus is wanted, this reaches it in a third of the passes a mono mesh would need.
Bruising scales with the number of needle entries far more than with the material delivered. Consolidating three filaments into one pass is the practical benefit.
23G to 26G with needles from 50 mm to 90 mm — built for cheek, jawline, neck and body rather than periorbital skin.
Three filaments at the same list price as two, which makes it the better value where tissue can accommodate the bulk.
Treatment areas
Areas where triple PDO threads are used. All are skin-density applications in tissue thick enough to accommodate three filaments — smooth threads cannot reposition anything.
Substantial collagen stimulation across the cheek in a third of the passes a mono mesh would need. Tissue here is usually thick enough to take three filaments without ridging.
“Bio-reinforcement” simply means building dermal density through collagen stimulation rather than adding anything that stays. The 23G × 90 mm option covers long neck tracks in single passes — though neck skin is thin, so check thickness before choosing a triple over a twin.
Increasing tissue density along a deep fold to soften its appearance. Softens rather than erases, and over weeks rather than immediately — worth stating at consultation.
Thin or lax skin on the body, where the 23G gauge has the rigidity to pass through denser tissue and where bulk is least likely to show. Skin quality work, not contouring.
PDO threads are sterile implantable medical devices. Which applications are permitted, and what training is required, is determined by the regulatory framework where you practise. Korea Filler Experts supplies the product; nothing here is a recommendation to treat any medical condition, and nothing here substitutes for hands-on training in thread technique.
Available sizes and specifications
| TR2360 | 23G · 60 mm needle · 90 mm thread · USP 6-0 × 3 matched strands |
| TR2390 | 23G · 90 mm needle · 150 mm thread · USP 6-0 × 3 matched strands |
| TR2560 | 25G · 60 mm needle · 90 mm thread · USP 7-0 × 2 + 6-0 mixed |
| TR2590 | 25G · 90 mm needle · 150 mm thread · USP 7-0 × 2 + 6-0 mixed |
| TR2650 | 26G · 50 mm needle · 70 mm thread · USP 7-0 × 3 matched strands |
| TR2660 | 26G · 60 mm needle · 90 mm thread · USP 7-0 × 3 matched strands |
| TR2690 | 26G · 90 mm needle · 150 mm thread · USP 7-0 × 3 matched strands |
| T2738 | 27G · 38 mm needle · 50 mm thread · USP 7-0 × 2 — two strands, not three (see note below) |
| Material | Polydioxanone (PDO) |
| Configuration | Three filaments per needle |
| Thread surface | Smooth — no barbs or cogs |
| Delivery | Pre-loaded in a sharp hypodermic needle |
| Pack size | 20 pieces per pack |
| Storage | Room temperature, dry, away from sunlight |
Checking the pack
- The model code matches your order. TR codes are genuine triples; the lone T2738 is a two-strand product.
- Each blister is intact and dry. A breached sterile barrier makes that unit waste.
- The expiry date is clear. PDO hydrolyses with moisture.
- The pack holds 20 pieces.
Not a periorbital product. Three filaments need a 23G–26G needle and occupy real space in tissue. For skin around the eye, use our Eye Cannula range instead.
What each component does
About the T2738 option
One size listed under this product — T2738, 27G × 38 mm — carries two filaments rather than three. Its code and specification match the T2738 sold under our Twin Thread listing exactly.
The most likely explanation is that a Twin variant has been filed under the Triple product in error. We have flagged it rather than quietly presenting a two-strand thread as a triple, because a practitioner ordering “a triple” and receiving a twin has been short-changed on half the material they were buying.
If you want a genuine triple, order one of the TR codes. If T2738 is what you need, it is the same product as the Twin at that size.
Matched versus mixed strands
Five of the genuine triples carry three filaments of the same USP size. The two 25G codes — TR2560 and TR2590 — carry two 7-0 strands and one 6-0.
In tissue, a mixed set presents different filament diameters along the same track, hydrolysing at slightly different rates because degradation relates to surface-area-to-volume ratio. The finer strands clear sooner than the heavier one. The supplier does not explain the design intent and we are not going to invent one — but the detail is not on the packaging, so it belongs here.
Where Triple sits in the range
- Mono — one filament. Cheapest, most flexible for fine mesh work.
- Twin — two laid parallel.
- Tornado Screw — two twisted into a spiral.
- Triple (this product) — three filaments. Most material per needle pass.
- Thread Filler — twenty fine filaments through a blunt cannula. Denser still, and far gentler on tissue.
None of them lifts. The choice between them is about how much PDO you want in a track and how many passes you are willing to make.
How to use NEO Triple Thread
Reference information for trained practitioners. This is the bulkiest smooth thread in the range, so plane control is less forgiving than with mono or twin. Thread insertion requires specific training in facial anatomy and technique.
Step by step
-
Plan a sparse pattern
Each triple carries roughly three times the material of a mono thread. A plan that would have used thirty mono threads needs around ten of these. Mark the zone with the patient upright.
-
Confirm the tissue can take it
Assess thickness by pinch before committing. Three filaments in thin skin will be palpable and may be visible — if the area is thin, a twin or a mono mesh is the better choice.
-
Prepare and anaesthetise
Thorough antisepsis — this is an implant. Local anaesthetic at entry points is usually warranted at 23G and 25G; topical may suffice at 26G.
-
Insert deeper than you would a mono
Advance in the subdermal plane, keeping depth consistent. Three filaments occupy noticeably more space, so the depth that sits invisibly for one strand may ridge with three.
-
Withdraw the needle, leave the threads
Hold the hub steady and withdraw along the same track. All three filaments stay behind together.
-
Trim and palpate carefully
Trim protruding thread flush at skin level, then palpate the full track. Ridging is more likely here than with lighter threads and far easier to address now than at review.
Administration notes
Bulk is the constraint, not stimulus. The reason not to use triples everywhere is that three filaments take up space. In the cheek, jawline, neck or body that is usually fine. In thin skin it shows — and once it shows, your options are limited.
Pinch-test before you commit. If you cannot comfortably pinch a fold of tissue over the intended track, the area is too thin for a triple.
- Single use. Never re-sterilise or reuse a thread or its needle.
- Do not place across active infection, inflamed skin, or recently placed filler.
- Keep clear of major vessels and nerves — a sharp needle gives no tactile warning.
- Dispose of needles into a sharps container per local clinical waste requirements.
After treatment
- Mild bruising, swelling and tenderness along the tracks are expected and usually settle within a week to ten days
- Avoid extreme facial expression and vigorous massage for about two weeks
- No saunas, steam rooms or strenuous exercise for 48 hours
- Sleep on the back where practical for the first few nights
- Defer dental work and facial treatments for two weeks
- Any spreading redness, increasing pain, discharge or a palpable ridge that is not settling needs reviewing
Storing and handling NEO Triple Thread
Store at room temperature in a dry place, away from direct sunlight. No refrigeration and no cold chain.
Each thread is individually sealed and sterile. Do not use any unit whose blister is open, torn, damp or damaged. Never re-sterilise — autoclaving destroys PDO.
The three filaments are loaded to deposit together. Do not attempt to separate them or load fewer than the full set.
Single use only. Do not reuse, re-sterilise or repackage. Dispose of used needles into a sharps container and unused product as clinical waste in line with local requirements.
What's included
Each pack contains one size only. Note that the T2738 option carries two filaments rather than three — order a TR code if you want a genuine triple. Antiseptic, anaesthetic, marking pen and sharps disposal are not supplied.
NEO Triple Thread — frequently asked questions
What is a triple thread?
Three polydioxanone filaments loaded on a single needle and placed together in one pass. All three are smooth — there are no barbs. It is the densest needle-delivered smooth thread in the NEO range.
Why is T2738 listed here if it only has two strands?
Because it is almost certainly filed under the wrong product. T2738 carries two filaments and its code and specification match the T2738 sold under our Twin Thread listing exactly.
We have flagged it rather than presenting a two-strand thread as a triple. If you want a genuine triple, order one of the TR codes.
Does more material eventually mean lift?
No, and this is the most common misconception at this end of the range. Smooth filaments have nothing to grip tissue with, and three of them grip exactly as well as one — which is to say not at all.
What three filaments give you is three times the collagen stimulus. Repositioning tissue requires barbs, full stop. Our Cog Cannula and Combi Cog are the products for that.
Can I use triples anywhere I would use monos?
No — bulk is the limit. Three filaments occupy real space, so in thin skin they can be palpable or visible.
A practical test: if you cannot comfortably pinch a fold of tissue over the intended track, the area is too thin. Use a twin or a mono mesh there instead.
How many should I place compared with mono threads?
Roughly a third. A plan that would have used thirty mono threads needs around ten triples. Over-placement is the usual error when stepping up.
Why do the 25G options mix filament thicknesses?
TR2560 and TR2590 carry two 7-0 strands and one 6-0 rather than three matched ones. The supplier does not document the reasoning.
In tissue it means different filament diameters hydrolysing at slightly different rates, the finer strands clearing first. We have put it on this page because it is not on the packaging.
How does it compare to Thread Filler Cannula?
Thread Filler carries twenty fine filaments through a blunt cannula — denser again, and much gentler on tissue because a blunt tip displaces vessels rather than cutting them.
If density is what you are after and bruising is a concern, Thread Filler is usually the better answer. Triple’s advantage is the sharp needle: no separate entry port and faster placement.
How long does the effect last?
The PDO hydrolyses over roughly six months. The collagen laid down around it persists beyond that, so the clinical effect outlasts the material. Review at six to nine months and plan from what you see.
Do they need refrigeration?
No. Room temperature, dry, out of direct sunlight — no cold chain to manage.
Who can buy and use these?
Threads are sterile implantable medical devices for use by trained healthcare professionals. Insertion requires specific training in facial anatomy and thread technique. We supply to practitioners qualified to perform the procedure in their jurisdiction, and do not sell to consumers.
Copyright 2026 © Korea Filler Experts. All right reserved.
