Miracle L
Polycaprolactone (PCL) 20% · formulated without hyaluronic acid (per our listing) · 5 × 2 mL vials per box · DEXLEVO, South Korea. A collagen-stimulating skin booster for skin quality.
$213.90
- 20% polycaprolactone (PCL) skin booster, listed without hyaluronic acid
- 5 × 2 mL vials per box by DEXLEVO, South Korea
- Course: 3 to 4 sessions about 4 weeks apart
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.
(+82) 10 7364 7998 Send a message on WhatsApp.
Miracle L: a PCL-only skin booster from DEXLEVO
Miracle L is a skin booster from DEXLEVO in South Korea built on 20% polycaprolactone (PCL) in a 2 mL vial. Our listing gives its composition as PCL without hyaluronic acid, which is what separates it from Miracle H. This listing is the box of five vials.
PCL is a biodegradable polymer used in several collagen-stimulating injectables. In Miracle L it is described as a solubilised colloid with no solid particles, which the listing says lets it flow through a fine needle and spread evenly through the dermis. The PCL is intended to support collagen renewal gradually over the weeks and months after treatment, so the focus is firmness and skin quality rather than hydration.
The course on our listing is three to four sessions about four weeks apart, followed by a yearly maintenance session. The five-vial box suits clinics that treat several patients or prefer to stock ahead; the single-vial listing suits trial use.
A single active ingredient: polycaprolactone, described as a solubilised colloid.
Intended to support collagen renewal over weeks and months rather than to hydrate.
Listings cite a 31G, 4 mm needle for placement into the dermis.
Five 2 mL vials per box for clinics that treat several patients.
Why practitioners choose Miracle L
For practitioners who prefer a collagen-stimulating treatment without a hyaluronic acid component, Miracle L is the PCL-only option in the Miracle range. Check the carton ingredient list to confirm composition for any patient with known sensitivities.
The PCL is described as solubilised rather than suspended as solid particles. Listings cite a fine 31G, 4 mm needle, which they describe as finer than the 26G typically used for similar mesotherapies.
Distributor listings say swelling typically settles within about an hour. Individual response varies, so tell patients to expect some redness, swelling or bruising.
Three to four sessions about four weeks apart, then a yearly maintenance session, is simple to explain and to schedule.
Five vials per box suits clinics that run regular skin-quality treatments and want stock on the shelf.
Treatment areas and indications
Areas and concerns where PCL skin boosters are used. All are skin-quality indications. The product does not replace volume.
Skin that has lost firmness, including the cheeks, cheekbones and the jawline.
Fine lines and the first signs of laxity on the forehead and face. The crow’s feet and under-eye area is listed for practitioners trained to treat it.
Patients who want gradual change from a collagen-focused treatment and understand that it is not immediate.
Thin, crepey skin on the chest.
Thin, ageing skin on the backs of the hands.
Miracle L is an injectable medical product. Which indications are permitted and what training is required are set by the regulatory framework where you practise. Korea Filler Experts supplies the product. Nothing here is a recommendation to treat any medical condition, and nothing here replaces manufacturer training.
What is inside Miracle L
| Active ingredient | Polycaprolactone (PCL), 20% (200 mg/mL) |
| Hyaluronic acid | None, per our listing |
| Other ingredients | Polyethylene glycol, water, glycerin, sodium carboxymethylcellulose, sodium lactate, sodium pyroglutamic acid |
| PCL form (listing) | Solubilised colloid, no solid particles |
| Presentation | 5 × 2 mL vials per box |
| Needle (listing) | 31G, 4 mm, into the dermis |
| Course (listing) | 3 to 4 sessions about 4 weeks apart, then yearly maintenance |
| Storage | 1 °C to 30 °C, away from direct sunlight |
| Manufacturer | DEXLEVO, South Korea |
| SKU | 08018 |
Before you order
- Check the lot number and expiry on the carton against the vial.
- We do not dispatch stock with under 6 months of shelf life remaining unless agreed in advance.
- Store between 1 °C and 30 °C, away from direct sunlight. Do not freeze or expose to heat.
- Compare the ingredient list on the carton with the specification above before you plan treatment for any patient with a known sensitivity.
- PCL has a long history as a medical material. That describes the material, not an approval of this finished product, so confirm what you may import and use where you practise.
Priced per box of five vials. A single vial is listed separately.
What each component does
Polycaprolactone (PCL), 20%
PCL is a biodegradable polyester that the body breaks down gradually. It has a long history as a material in medical products, including dissolvable sutures. In Miracle L it is described as solubilised and dispersed as a colloid rather than carried as microspheres in a gel. At 20% the concentration is 200 mg per mL.
No hyaluronic acid (per our listing)
Our listing gives Miracle L as a PCL-only product. That is the difference from Miracle H, which adds 1% hyaluronic acid for hydration. Check the carton ingredient list against this page before you plan treatment.
Carrier solution
Polyethylene glycol, water, glycerin, sodium carboxymethylcellulose, sodium lactate and sodium pyroglutamic acid make up the carrier solution. Our listing does not state the function of each, so check the carton for the definitive ingredient list.
How Miracle L is used
Reference information for trained practitioners. The manufacturer’s instructions for use and your training take precedence over this page.
Step by step
-
Assess and consent
Confirm the aim is skin quality. Review medical history, medication, autoimmune disease, scarring tendency and previous fillers. Check for hypersensitivity to PCL, pregnancy and breastfeeding. Explain that the change is gradual.
-
Prepare the skin
Remove make-up and cleanse thoroughly. Apply topical anaesthetic if required.
-
Prepare the vial
Inspect the vial, seal and expiry. Roll the vial gently before use to give an even consistency and do not shake it vigorously, then draw up aseptically.
-
Inject into the dermis
The listing describes placing the product into the dermis with a fine 31G, 4 mm needle. Use the depth, spacing and volume taught in your training and the instructions for use.
-
Avoid over-treatment
This is a skin-quality treatment, not a volume treatment. Do not add extra product to force an immediate change.
-
Follow the course
The listed course is three to four sessions about four weeks apart, then a yearly maintenance session. Review the response before each further treatment.
Administration notes
Set expectations. PCL works gradually. Visible change is described as beginning around a week after the first session and building over the following weeks. A patient who wants an immediate change in shape or volume needs a different product.
Delicate areas need specific training. The under-eye and crow’s feet area is listed, but it carries greater risk and should only be treated by practitioners trained for it.
- Single use. One vial, one patient. Discard any remainder.
- Do not inject into infected, inflamed or broken skin.
- Listings mention delivery with a needle-free device. Check the instructions for use before using any device other than a fine needle.
- Know how to recognise and manage nodules and vascular events.
- Dispose of needles into a sharps container in line with local clinical waste rules.
After treatment
- Redness, swelling, tenderness and bruising are common and settle within days
- Small lumps may be felt at the injection points for a period
- Avoid strenuous exercise, saunas and steam rooms for 48 hours
- Seek urgent review for severe pain, blanching, skin colour change, visual change or a lump that grows or becomes tender
Storing and handling Miracle L
Store in a cool, dry place between 1 °C and 30 °C. Do not freeze or expose to heat. Keep away from direct sunlight.
Check the vial, seal and expiry. Roll the vial gently before use and do not shake it vigorously. Do not use a vial that is damaged or contains visible particles.
Single patient, single session. Do not retain or reuse an opened vial.
Do not use if the packaging is damaged or the expiry date has passed. Dispose of used vials, syringes and needles as clinical waste in line with local requirements.
What's included with Miracle L
Needles, syringes and topical anaesthetic are not supplied.
Miracle L — frequently asked questions
What is Miracle L?
A skin booster from DEXLEVO built on 20% solubilised polycaprolactone (PCL) in a 2 mL vial. Our listing gives it as PCL without hyaluronic acid. The PCL is intended to support collagen renewal over time.
How is Miracle L different from Miracle H?
Miracle H adds 1% hyaluronic acid to the PCL for hydration. Miracle L is listed as PCL only. Both use 20% PCL.
Is Miracle L a filler?
No. It is a skin-quality treatment placed in the dermis and is not used to restore volume or correct folds. Choose a filler if the patient wants an immediate change in shape.
How is it injected?
The listing describes injection into the dermis with a fine 31G, 4 mm needle. Follow the technique in the instructions for use and your own training.
How many sessions are needed?
The listed course is three to four sessions about four weeks apart, followed by a yearly maintenance session. Visible effects are described as beginning around a week after the first session.
How long do results last?
Listings describe effects lasting up to a year. We found no independent data, so treat this as a manufacturer figure. Duration varies with the patient and the area treated.
How does the box differ from the single vial?
The formulation is the same. The box holds five vials for clinics treating several patients, and the single-vial listing suits trial use.
How should the vial be handled before use?
Roll it gently to give an even consistency and do not shake it vigorously. Store it between 1 °C and 30 °C, away from direct sunlight, and do not freeze it or expose it to heat.
Who can buy and use this product?
Injectable products are for administration by licensed healthcare practitioners. We supply qualified professionals and do not sell to consumers.
Customer Reviews
Share your experience with this product. Your honest review helps other customers make better choices.
- Sort By
- Newest
- Oldest
- Highest Rating
- Lowest Rating
Copyright 2026 © Korea Filler Experts. All right reserved.
