PLLA Cube Pink VOL
Topical PLLA + PN skin booster with vitamin C and glutathione · 100 mg freeze-dried powder per vial · LabInCube, South Korea.
$119.90
You save
- PLLA Cube Pink Vol is LabInCube’s higher-strength skin booster, combining 35mg PLLA and 8mg PN with Sodium Hyaluronate, Vitamin C, and Glutathione. Applied via microneedling, RF, or massage, it targets volume, tone, and hydration in a single freeze-dried formula.
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.

(+82) 10 7364 7998 Send a message on WhatsApp.
PLLA Cube Pink VOL: a higher-strength topical PLLA skin booster from LabInCube
PLLA Cube Pink VOL is the higher-strength formula in LabInCube’s PLLA Cube line. Each vial holds 100 mg of freeze-dried powder containing 35 mg of poly-L-lactic acid (PLLA) and 8 mg of PN (polynucleotide, sodium DNA), together with sodium hyaluronate, vitamin C and glutathione. LabInCube’s patented INCUBE™ technology is designed to protect the more delicate ingredients and release them gradually.
It is a topical product, not an injectable. Practitioners apply it with microneedling, an energy-based device such as radiofrequency or laser, or manual massage. It is used for skin quality: firmness, hydration and an even-looking, brighter tone. It is for use by trained professionals only.
35 mg PLLA and 8 mg PN, with sodium hyaluronate, vitamin C and glutathione.
Designed to protect delicate actives and release them gradually.
Spherical PLLA particles of 30 to 80 μm.
Reconstituted with sterile water immediately before use.
About PLLA Cube Pink VOL
35 mg PLLA per vial, plus PN, compared with the original PLLA Cube.
Vitamin C and glutathione are included to support an even-looking, brighter tone and protect against oxidative stress.
Sodium hyaluronate gives hydration and a plumper look to the skin surface.
Applied with microneedling, radiofrequency or laser devices, or by manual massage.
Treatment areas and skin concerns
Skin concerns and areas where topical PLLA + PN boosters are used, as listed on our previous page.
Skin that has lost firmness or looks sagging.
Skin that looks tired, dull or uneven.
Fine lines and skin that looks dry.
Cheeks, nasolabial folds, jawline, temples, forehead, chin, neck and décolletage.
PLLA Cube Pink VOL is a professional skin product. How it is classified and what it may be used for are set by the regulatory framework where you practise. Korea Filler Experts supplies the product. Nothing here is a recommendation to treat any medical condition, and nothing here replaces manufacturer training.
PLLA Cube Pink VOL specification
| Product type | Topical PLLA + PN skin booster |
| PLLA (poly-L-lactic acid) | 35 mg per vial |
| PN (sodium DNA) | 8 mg per vial |
| Other actives | Sodium hyaluronate, vitamin C, glutathione |
| Format | 100 mg freeze-dried powder per vial, reconstitution required |
| Reconstitution | 4 cc sterile water; dissolves in about 2 to 4 minutes after shaking |
| Particle size | 30 to 80 μm, uniform and spherical |
| Technology | INCUBE™ (patented encapsulation and controlled release) |
| Manufacturer | LabInCube, South Korea |
| SKU | 06027 |
Before you order
- Topical product. PLLA Cube Pink VOL is applied to the skin with microneedling, energy-based devices or massage. It is not an injectable. Confirm how it is classified and what you may use it for where you practise.
- Every vial ships in its original packaging with the lot number and expiry date.
- We do not dispatch stock with under 6 months of shelf life remaining unless agreed in advance.
Priced per vial, with quantity discounts at five, ten and twenty vials.
What each component does
PLLA, 35 mg
Poly-L-lactic acid is a biodegradable polymer used in collagen biostimulators. In this product the particles are uniform and spherical, 30 to 80 μm, which LabInCube says helps them distribute evenly.
PN (sodium DNA), 8 mg
Polynucleotides are described as supporting cell renewal and tissue repair.
Sodium hyaluronate, vitamin C and glutathione
Sodium hyaluronate gives hydration. Vitamin C and glutathione are antioxidants that support an even-looking, brighter tone.
INCUBE™ technology
LabInCube’s patented encapsulation system is designed to protect delicate ingredients such as vitamin C and glutathione until use and release them gradually.
How PLLA Cube Pink VOL is used
Reference information for trained practitioners. The manufacturer’s instructions and the instructions for the delivery device used take precedence over this page.
Step by step
-
Assess and consent
Review skin condition, allergies, medication and scarring tendency. Explain that the product is topical and that results are gradual.
-
Reconstitute
Add 4 cc of sterile water to the vial and shake. The powder dissolves fully in about 2 to 4 minutes. Reconstitute only immediately before use.
-
Prepare the skin
Cleanse the skin thoroughly and remove make-up.
-
Apply
Apply the product evenly with microneedling, an energy-based device such as radiofrequency or laser, or manual massage. Spread it evenly and avoid bolus application, since the aim is even absorption rather than localised volume.
-
Aftercare
Follow the aftercare for the delivery method used, and the advice below.
Administration notes
Even distribution, not bolus. The product is intended to be spread evenly over the treatment area, not placed as a depot.
- Single use. Reconstitute immediately before use and do not store the reconstituted product.
- Use sterile technique with any device that breaks the skin surface, such as microneedling.
- Do not use on infected, inflamed or broken skin.
- Do not use in patients with known hypersensitivity to any ingredient.
After treatment
- Avoid heat, sweat and sun exposure for 24 to 48 hours
- Skip make-up and active skincare products for the first day
- Keep the skin clean, calm and moisturised, and use daily SPF on treated areas
- Avoid facial treatments or massage for at least a week
Storing and handling PLLA Cube Pink VOL
Store the freeze-dried powder at room temperature, away from light.
Use before the expiry date, and only if the packaging and vial are intact.
Reconstitute only immediately before use. Single patient, single session. Do not retain or reuse any remainder.
Do not use if the packaging is damaged or the expiry date has passed. Dispose of used vials and any needles or microneedling tips as clinical waste in line with local requirements.
What's included with PLLA Cube Pink VOL
Sterile water, syringes, microneedling devices and any energy-based devices are not supplied.
PLLA Cube Pink VOL — frequently asked questions
What is PLLA Cube Pink VOL?
LabInCube’s higher-strength topical skin booster, with 35 mg PLLA and 8 mg PN per vial, plus sodium hyaluronate, vitamin C and glutathione.
Is it injected?
No. Like the original PLLA Cube, it is applied topically with microneedling, energy-based devices or manual massage.
How is it different from the original PLLA Cube?
Pink VOL has a higher PLLA content and adds PN. It also comes as a freeze-dried powder that must be reconstituted, rather than a ready-to-use liquid.
How do I prepare it?
Add 4 cc of sterile water to the vial and shake. It dissolves fully in about 2 to 4 minutes. Reconstitute only immediately before use.
Which areas can be treated?
The listing names the cheeks, nasolabial folds, jawline, temples, forehead, chin, neck and décolletage.
Who can buy and use this product?
We supply qualified aesthetic professionals and do not sell to consumers.



