Edel X
Cross-linked hyaluronic acid dermal filler range with lidocaine · Edel X Soft, Mild, Hard and Ultra · Hy-BRID technology · EG Bio Co, Ltd, South Korea.
Original price was: $45.90.$35.90Current price is: $35.90.
- Cross-linked hyaluronic acid filler range from EG Bio
- Soft, Mild, Hard and Ultra gels
- 24 mg/mL HA with 0.3% lidocaine
- Hy-BRID two-step cross-linking technology
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.
(+82) 10 7364 7998 Send a message on WhatsApp.
Edel X: hyaluronic acid fillers from EG Bio
Edel X is a range of cross-linked hyaluronic acid (HA) dermal fillers with lidocaine from EG Bio Co, Ltd., a South Korean company. EG Bio describes a proprietary process called Hy-BRID, which combines a two-step cross-linking process with an advanced purification method and is intended to give the gel its viscoelasticity.
This listing carries four gels, from the lightest to the firmest. Soft is injected into the superficial dermis for fine lines. Mild is placed in the superficial dermis to the middle subcutaneous layer, for lines and volume loss in the cheeks and around the mouth. Hard is a firmer gel used for deeper folds and for structure in the cheeks, lips and chin. Ultra is the densest gel and is placed in the deep subcutaneous layer for volume and contouring in the cheeks, chin and jawline.
The syringe has a pushrod design that EG Bio says suits different hand sizes and resists slipping. The gels contain 24 mg/mL of cross-linked HA with 0.3% lidocaine for comfort. Select the gel you need using the options above the add-to-cart button.
The lightest gel, injected into the superficial dermis for fine lines.
Mild suits lines and volume loss at middle depth. Hard is firmer, for deeper folds and structure.
The densest gel, placed deeply for volume and contouring of the cheeks, chin and jawline.
EG Bio's two-step cross-linking process combined with advanced purification.
Why practitioners choose Edel X
Soft, Mild, Hard and Ultra cover fine lines, middle-depth correction, deeper folds and structural volume from a single Korean product range.
EG Bio describes a two-step cross-linking process combined with an advanced purification method, intended to give the gel good viscoelasticity.
The gels contain 0.3% (3 mg/mL) lidocaine to reduce discomfort during injection.
EG Bio designed the syringe pushrod to suit different hand sizes and to resist slipping, which supports controlled injection.
Our listing cites 30G for Soft, 27G for Mild and 25G or 27G for Hard and Ultra, so each gel is used with a needle suited to its density.
Treatment areas and indications
Areas where the gels in the Edel X range are used. Approved indications and age limits differ by market, so follow the instructions for use for the gel and your country.
Superficial lines, injected into the superficial dermis.
Lines in the cheeks and around the mouth, and early volume loss.
Deeper folds where a firmer gel is preferred.
Lip structure and the area around the mouth.
Volume, structure and contouring of the mid and lower face.
Edel X gels are medical devices for injection. Which indications are permitted and what training is required are set by the regulatory framework where you practise. Korea Filler Experts supplies the product. Nothing here is a recommendation to treat any medical condition, and nothing here replaces manufacturer training.
What is inside Edel X
| Product type | Cross-linked hyaluronic acid dermal filler with lidocaine |
| Hyaluronic acid | Cross-linked HA, 24 mg/mL |
| Lidocaine | Lidocaine HCl, 3 mg/mL (0.3%) |
| Gels on this listing | Soft, Mild, Hard, Ultra |
| Technology | Hy-BRID: two-step cross-linking with advanced purification (EG Bio) |
| Needle (listing) | Soft 30G, Mild 27G, Hard and Ultra 25G or 27G |
| Regulatory (manufacturer-stated) | EG Bio states CE, GMP and ISO certifications for Edel X |
| Storage | As stated on the carton; do not freeze; protect from direct sunlight |
| Manufacturer | EG Bio Co, Ltd, South Korea |
Before you order
- Choose the variation (Soft, Mild, Hard or Ultra) before adding to your cart.
- Check the lot number and expiry on the carton against the syringe.
- We do not dispatch stock with under 6 months of shelf life remaining unless agreed in advance.
- Check the ingredient list on the carton before you plan treatment.
- Indications and approvals differ by country, so confirm what you may import and use where you practise.
Quantity discounts apply at five, ten and twenty units.
What each component does
Cross-linked hyaluronic acid, 24 mg/mL
Hyaluronic acid is a sugar found naturally in skin, where it binds water. In a filler it is cross-linked so that it lasts longer than natural HA before the body breaks it down. Edel X is listed at 24 mg/mL, and the four gels differ in how firm they are.
Lidocaine, 0.3%
Lidocaine hydrochloride at 3 mg/mL (0.3%) is included for comfort during injection. It is a local anaesthetic. Screen patients for lidocaine allergy, and check the carton to confirm the ingredients of your syringe.
Hy-BRID
Hy-BRID is EG Bio’s name for its manufacturing process: a two-step cross-linking process combined with an advanced purification method. This is the manufacturer’s description, and we do not hold independent data on it.
Which gel for which area
- Soft: fine lines, injected into the superficial dermis.
- Mild: lines and volume loss at middle depth, injected into the superficial dermis to the middle subcutaneous layer.
- Hard: deeper folds and structure in the cheeks, lips and chin, placed in deeper tissue as the instructions for use direct.
- Ultra: volume and contouring, injected into the deep subcutaneous layer.
Approved indications differ by market. Confirm them in the instructions for use for your country.
How it works
The gel is placed in the skin or deeper tissue, where it adds volume mechanically and binds water. The cross-linking slows its breakdown, and the body gradually absorbs it over months.
How Edel X is used
Reference information for trained practitioners. The manufacturer’s instructions for use for the specific gel and your training take precedence over this page.
Step by step
-
Assess and consent
Review medical history, allergies (including to lidocaine), medication, bleeding risk, previous fillers and the patient’s goals. Explain the expected result, the risks and the possibility of needing hyaluronidase.
-
Choose the gel
Select Soft, Mild, Hard or Ultra according to the area, depth and result needed, following the instructions for use.
-
Prepare the skin
Remove make-up and cleanse. Mark the treatment area and apply topical anaesthetic if required.
-
Inspect the syringe
Check the packaging, seal and expiry. Use the sterile needle supplied or a needle or cannula recommended in the instructions for use.
-
Inject as taught
Soft is injected into the superficial dermis, Mild into the superficial dermis to the middle subcutaneous layer, and Hard and Ultra into deeper tissue, using the technique in the instructions for use and your training. Inject slowly and with low pressure, and stop at once if the patient reports unexpected pain or you see blanching.
-
Review
Assess the result, mould gently if the technique requires it, and plan any review according to the gel used and the area treated. Volume effects are visible straight after injection.
Administration notes
Know the risks of the area. Filler can cause vascular occlusion. Practitioners should know the anatomy of the area, recognise the signs early and have hyaluronidase and an emergency protocol immediately available.
- Single use. One syringe, one patient. Discard any remainder with the needle.
- Do not inject into infected, inflamed or broken skin.
- Do not use in patients allergic to hyaluronic acid or lidocaine.
- Dispose of needles into a sharps container in line with local clinical waste rules.
After treatment
- Redness, swelling, tenderness and bruising are common and settle within days
- Avoid strenuous exercise, heat, saunas and alcohol for about 24 to 48 hours
- Seek urgent review for severe pain, blanching, skin colour change, visual change or a lump that grows or becomes tender
Storing and handling Edel X
Store as stated on the carton and in the instructions for use. Do not freeze. Protect from direct sunlight.
Keep the syringe in its original sterile packaging until use. Check the seal and expiry. Do not use if the packaging is damaged.
Single patient, single session. Discard the syringe and needle after use.
Do not use if the packaging is damaged or the expiry date has passed. Dispose of used syringes and needles as clinical waste in line with local requirements.
What's included with Edel X
Ask us if you need the exact pack contents before you order. Topical anaesthetic and hyaluronidase are not supplied.
Edel X — frequently asked questions
What is Edel X?
A range of cross-linked hyaluronic acid dermal fillers with lidocaine from EG Bio Co, Ltd. in South Korea. This listing carries Soft, Mild, Hard and Ultra.
What is the difference between Soft, Mild, Hard and Ultra?
Each gel has a different firmness and injection depth. Soft is for fine lines in the superficial dermis. Mild suits middle-depth lines and volume loss. Hard is firmer, for deeper folds and structure. Ultra is the densest, placed deeply for volume and contouring.
What is Hy-BRID?
Hy-BRID is EG Bio’s name for its manufacturing process, which it describes as a two-step cross-linking process combined with an advanced purification method. We do not hold independent data on it.
Does Edel X contain lidocaine?
Yes. The gels contain lidocaine at 3 mg/mL (0.3%) to reduce discomfort during injection.
Is Edel X CE marked?
EG Bio announced CE mark certification for Edel X in February 2024 and states CE, GMP and ISO certifications. Requirements differ by country, so ask us before ordering if you need documentation for your market.
How long do the results last?
Duration varies with the gel, the injection depth, the area and the patient, and we do not quote a fixed figure. Check the manufacturer’s instructions for use.
Can it be dissolved?
Yes. Hyaluronic acid fillers can be broken down with hyaluronidase. Practitioners should have it available.
Who can buy and use this product?
Dermal fillers are for administration by licensed healthcare practitioners trained in injection technique. We supply qualified professionals and do not sell to consumers.
Customer Reviews
Share your experience with this product. Your honest review helps other customers make better choices.
- Sort By
- Newest
- Oldest
- Highest Rating
- Lowest Rating
Great filler, great price. What more could I ask for?
Finally found something that fits our clinic's needs without stretching the budget.
A little goes a long way. Really nice to work with.
Didn't expect to be this impressed. The handling alone makes it worth considering.
I wasn't expecting this level of quality at this price. Really impressed!
This filler is seriously underrated. The quality is fantastic for the price.
The quality speaks for itself. Easily a five-star purchase.
Honestly, why pay more? This has everything I need in a filler.
Honestly, the price is a steal for this quality. Very happy with it.
Honestly better than I expected at this price point. Very impressed.
Copyright 2026 © Korea Filler Experts. All right reserved.
