E.P.T.Q S500 3.0mL
Large-syringe format · e.p.t.q. S500 3.0 mL · cross-linked hyaluronic acid · HA 24 mg/mL · 3 × 3.0 mL syringes (9 mL per box) · Jetema, South Korea.
$149.00
You save
- Large-syringe format of the firmest e.p.t.q. gel, S500
- Cross-linked hyaluronic acid, 24 mg/mL
- 3 x 3.0 mL syringes per box, as listed
- Made by Jetema, South Korea
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.
(+82) 10 7364 7998 Send a message on WhatsApp.
e.p.t.q. S500 3.0 mL: the large-syringe format of the firmest e.p.t.q. gel
e.p.t.q. S500 3.0 mL is the large-syringe format of S500, the firmest gel in the e.p.t.q. range from Jetema Co, Ltd. in South Korea. The gel is listed at 24 mg/mL of cross-linked hyaluronic acid (HA). It is the same gel as the standard e.p.t.q. S500 and is sold here in a larger pack for bigger treatments.
As listed, each box holds 3 syringes of 3.0 mL, 9.0 mL in total. S500 is injected into the subcutaneous or supraperiosteal layer for volume and definition of the cheekbones, chin and jawline.
Lidocaine content is not confirmed for this format, so check the ingredient list on the carton, and ask us if you need to know before you order.
3 syringes of 3.0 mL per box, as listed, for larger treatment sessions.
The firmest gel in the range, injected into the subcutaneous or supraperiosteal layer.
Used for the cheekbones, chin and jawline.
Lidocaine content is not confirmed for this format. Check the ingredients before treatment.
Why practitioners choose the 3.0 mL format
As listed, 9.0 mL per box supports larger-area or higher-volume sessions without opening several small syringes.
S500 is the firmest gel in the range and is placed in the subcutaneous or supraperiosteal layer.
Jetema Co, Ltd. makes the e.p.t.q. range in South Korea.
The gel is biodegradable, so the body gradually breaks it down. Hyaluronidase is available to dissolve HA fillers if needed.
Treatment areas and indications
Areas where e.p.t.q. S500 is used. Approved indications and age limits differ by market, so follow the instructions for use and your country.
Volume and definition, injected into the subcutaneous or supraperiosteal layer.
Projection and definition of the chin.
Definition and contouring of the jawline.
e.p.t.q. S500 is a medical device for injection. Which indications are permitted and what training is required are set by the regulatory framework where you practise. Korea Filler Experts supplies the product. Nothing here is a recommendation to treat any medical condition, and nothing here replaces manufacturer training.
What is inside e.p.t.q. S500 3.0 mL
| Product type | Cross-linked hyaluronic acid dermal filler |
| Hyaluronic acid | Cross-linked HA, 24 mg/mL |
| Lidocaine | Not confirmed for this format; check the carton |
| Gel | e.p.t.q. S500 |
| Placement (listing) | Subcutaneous or supraperiosteal layer |
| Presentation (listing) | 3 syringes of 3.0 mL per box, 9.0 mL in total |
| Duration (previous listing) | Up to about 12 months, varying by area and patient |
| Storage (previous listing) | 2 °C to 25 °C; do not freeze; protect from direct sunlight |
| Manufacturer | Jetema Co, Ltd, South Korea |
Before you order
- This is the large-syringe format. The standard e.p.t.q. S500 is a separate, smaller pack.
- Ask us to confirm the pack contents and whether the syringes contain lidocaine before you order.
- Check the lot number and expiry on the carton against the syringes.
- We do not dispatch stock with under 6 months of shelf life remaining unless agreed in advance.
- Indications and approvals differ by country, so confirm what you may import and use where you practise.
Quantity discounts apply at five, ten and twenty boxes.
What each component does
Cross-linked hyaluronic acid, 24 mg/mL
Hyaluronic acid is a sugar found naturally in skin, where it binds water. In a filler it is cross-linked so that it lasts longer than natural HA before the body breaks it down. e.p.t.q. S500 is listed at 24 mg/mL and is the firmest gel in the e.p.t.q. range.
Lidocaine
Whether this format contains lidocaine is not confirmed, and the e.p.t.q. range exists both with and without it. Check the ingredient list on the carton, and if it contains lidocaine, screen patients for lidocaine allergy.
Large-syringe pack
As listed, each box holds three 3.0 mL syringes, 9.0 mL in total, compared with the single 1.0 mL or 1.1 mL syringe of the standard S500 pack. Each syringe is for one patient. Do not store a partly used syringe for another patient.
Which areas
S500 is used for volume and definition of the cheekbones, chin and jawline, injected into the subcutaneous or supraperiosteal layer. Approved indications differ by market. Confirm them in the instructions for use for your country.
How it works
The gel is placed in the skin or deeper tissue, where it adds volume mechanically and binds water. The cross-linking slows its breakdown, and the body gradually absorbs it over months.
How e.p.t.q. S500 is used
Reference information for trained practitioners. The manufacturer’s instructions for use and your training take precedence over this page.
Step by step
-
Assess and consent
Review medical history, allergies (including to lidocaine if your syringe contains it), medication, bleeding risk, previous fillers and the patient’s goals. Explain the expected result, the risks and the possibility of needing hyaluronidase.
-
Plan the volume
Plan the total volume and the areas for the session. A 3.0 mL syringe holds more product than most single areas need, and each syringe is for one patient.
-
Prepare the skin
Remove make-up and cleanse. Mark the treatment area and apply topical anaesthetic if required, particularly if your syringe contains no lidocaine.
-
Inspect the syringe
Check the packaging, seal and expiry. Use a needle or cannula recommended in the instructions for use, following aseptic technique.
-
Inject as taught
S500 is injected into the subcutaneous or supraperiosteal layer, using the technique in the instructions for use and your training. Inject slowly and with low pressure, and stop at once if the patient reports unexpected pain or you see blanching.
-
Review
Assess the result, mould gently if the technique requires it, and plan any review according to the area treated. Volume effects are visible straight after injection.
Administration notes
Know the risks of the area. Filler can cause vascular occlusion. Practitioners should know the anatomy of the area, recognise the signs early and have hyaluronidase and an emergency protocol immediately available.
- Single use. One syringe, one patient. Do not reuse or resterilise. Discard any remainder with the needle.
- Do not inject into infected, inflamed or broken skin.
- Do not use in patients allergic to hyaluronic acid, or to lidocaine if your syringe contains it.
- Dispose of needles into a sharps container in line with local clinical waste rules.
After treatment
- Redness, swelling, tenderness and bruising are common and settle within days
- Avoid strenuous exercise, heat, saunas and alcohol for about 24 to 48 hours
- Seek urgent review for severe pain, blanching, skin colour change, visual change or a lump that grows or becomes tender
Storing and handling e.p.t.q. S500 3.0 mL
Our previous listing gives 2 °C to 25 °C. Follow the carton and the instructions for use if they differ. Do not freeze, and protect from direct sunlight.
Keep the syringes in their original sterile packaging until use. Check the seal and expiry. Do not use if the packaging is damaged.
Single patient, single session. Do not reuse or resterilise. Discard the syringe and needle after use.
Do not use if the packaging is damaged or the expiry date has passed. Dispose of used syringes and needles as clinical waste in line with local requirements.
What's included with e.p.t.q. S500 3.0 mL
Ask us to confirm the pack contents, including any needles, and whether the syringes contain lidocaine, before you order. Topical anaesthetic and hyaluronidase are not supplied.
e.p.t.q. S500 3.0 mL — frequently asked questions
What is e.p.t.q. S500 3.0 mL?
The large-syringe format of S500, the firmest gel in Jetema’s e.p.t.q. range. As listed, each box holds three 3.0 mL syringes, 9.0 mL in total.
How is it different from the standard e.p.t.q. S500?
It is the same S500 gel, listed at 24 mg/mL, sold in a larger pack. The standard S500 comes as a single 1.0 mL or 1.1 mL syringe.
Does it contain lidocaine?
This is not confirmed for this format, and the e.p.t.q. range exists with and without lidocaine. Check the ingredient list on the carton, or ask us before you order.
Which areas is S500 used for?
S500 is the firmest e.p.t.q. gel, used for volume and definition of the cheekbones, chin and jawline, injected into the subcutaneous or supraperiosteal layer.
How long do the results last?
Our previous listing gave up to about 12 months. Duration varies with the area, the injection depth and the patient, so treat this as an indication only.
Can it be dissolved?
Yes. Hyaluronic acid fillers can be broken down with hyaluronidase. Practitioners should have it available.
Who can buy and use this product?
Dermal fillers are for administration by licensed healthcare practitioners trained in injection technique. We supply qualified professionals and do not sell to consumers.
Customer Reviews
Share your experience with this product. Your honest review helps other customers make better choices.
- Sort By
- Newest
- Oldest
- Highest Rating
- Lowest Rating
Really appreciate the larger syringe option. Makes planning our appointments easier.
The larger syringe format was the whole reason I bought it. Much more convenient for the kind of appointments we do.
Copyright 2026 © Korea Filler Experts. All right reserved.
