JBP Nanoneedle 30G
Ultra-thin-wall 30G needle · 4, 8 and 13 mm lengths · 100 pieces per box · JBP Nanoneedle.
$89.90
The fusion of artistry and technology has resulted in this ultra-fine needle, designed to decrease patient discomfort during needling and reduce bleeding and swelling. Thanks to the specialized Micron Sharpness technique, this needle, with its ultra-thin wall, significantly reduces friction resistance, leading to decreased pain and bleeding during procedures. It allows for the injection of high-viscosity solutions using exceptionally fine needles.
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.
(+82) 10 7364 7998 Send a message on WhatsApp.
JBP Nanoneedle 30G: an ultra-thin-wall 30G needle
JBP Nanoneedle 30G is a fine 30G injection needle with an ultra-thin wall, made with a micro-sharpening process called Micron Sharpness. The thin wall gives a wide inner diameter for the needle’s size, so thicker solutions can be injected through a fine needle.
It comes in three lengths, 4 mm, 8 mm and 13 mm. Each box contains 100 pieces.
A common gauge for small-volume injection.
A wider inner channel for the needle's outer size.
Listed for injecting higher-viscosity solutions through a fine needle.
The price is the same for each length.
About JBP Nanoneedle 30G
The manufacturer’s micro-sharpening technique for the needle tip.
Designed to lower friction as the solution passes through.
4 mm, 8 mm and 13 mm.
100 needles per box.
Listed uses
How this needle is listed, based on our previous page.
Injecting higher-viscosity solutions through a fine needle.
This is a medical device accessory. How it is classified and what it may be used for are set by the regulatory framework where you practise. Korea Filler Experts supplies the product to qualified professionals.
JBP Nanoneedle 30G specification
| Product type | Single-use sterile injection needle |
| Gauge | 30G, ultra-thin wall |
| Lengths | 4 mm, 8 mm and 13 mm (select on the product page) |
| Packing | 100 pieces per box |
| Price | The same for every length |
Before you order
- Needles are for professional use and are single use.
- Every box ships in its original packaging with the lot number and expiry date.
- We do not dispatch stock with under 6 months of shelf life remaining unless agreed in advance.
Priced per box of 100. Select the length on the product page.
What each component does
Gauge
Gauge is the needle thickness: the higher the number, the thinner the needle. 30G is a little thicker than the 33G version in this range.
Ultra-thin wall
A thinner needle wall leaves a larger inner channel at the same outer size. This lowers the resistance the solution meets as it passes through.
Length
Length sets how far the needle reaches. The right length depends on the technique and the area, and is for the practitioner to choose.
How the needle is handled
General handling for trained users. Product instructions and your clinical protocols take precedence.
Step by step
-
Check the pack
Check the expiry date and the sterile seal. A broken seal means the needle is no longer sterile.
-
Attach to the syringe
Fit the needle firmly on a compatible Luer syringe so it does not come loose under injection pressure.
-
Inject
Use the technique and depth set by your protocol.
-
Dispose
Do not recap. Drop the needle into a sharps container to avoid needle-stick injury.
Administration notes
Single use. Use a new needle for every patient. A fine needle can blunt or bend after a single puncture.
- Do not use a needle that is bent, damaged or has a broken seal.
- Dispose of used needles in a sharps container in line with local clinical waste rules.
Storing and handling JBP Nanoneedle 30G
Keep each needle in its sealed packaging until use.
Store in a cool, dry place, away from direct sunlight and moisture.
Do not reuse or resterilise. Discard after use.
Do not use a needle that is damaged, has a broken seal or is past its expiry date.
What's included with JBP Nanoneedle 30G
Syringes and sharps containers are not part of the listing.
JBP Nanoneedle 30G — frequently asked questions
What is JBP Nanoneedle 30G?
An ultra-thin-wall 30G injection needle, supplied in boxes of 100.
Which lengths are available?
4 mm, 8 mm and 13 mm. Select the length on the product page.
What is Micron Sharpness?
The manufacturer’s micro-sharpening process for the needle tip. It is aimed at a thin wall and a smooth point.
Why does wall thickness matter?
A thinner wall leaves a wider inner channel for a given outer size, so thicker solutions meet less resistance.
Are the needles reusable?
No. They are single use.
Who can buy this product?
We supply qualified professionals and do not sell to consumers.
Copyright 2026 © Korea Filler Experts. All right reserved.
