VOM
Multi-layered cross-linked hyaluronic acid dermal filler with 0.3% lidocaine · VOM Light, Intensive and Volume · R2 technology · CG Bio, South Korea.
$37.90
You save
- Multi-layered hyaluronic acid filler range from CG Bio
- Light, Intensive and Volume gels
- 20 mg/mL HA with 0.3% lidocaine
- Made with CG Bio R2 technology
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
Did you like this product? Add to favorites now and follow the product.
(+82) 10 7364 7998 Send a message on WhatsApp.
VOM: multi-layered hyaluronic acid fillers from CG Bio
VOM is a range of cross-linked hyaluronic acid (HA) dermal fillers from CG Bio, a South Korean company. The gel is described as multi-layered: a gel layer surrounds the HA particles, a design that is intended to balance easy moulding with lifting strength. CG Bio calls its manufacturing process R2 technology. The gels are listed at 20 mg/mL of cross-linked HA with 0.3% lidocaine.
This listing carries three gels. Light is injected into the mid dermis for fine to medium lines. Intensive is injected into the deep dermis for deeper lines such as the nasolabial folds. Volume is placed in the subcutaneous layer for volume and contouring in the cheeks and chin.
Select the gel you need using the options above the add-to-cart button.
The lightest gel, injected into the mid dermis for fine to medium lines.
For deeper lines such as the nasolabial folds, injected into the deep dermis.
The firmest gel, placed in the subcutaneous layer for volume and contouring.
A gel layer surrounds the HA particles, intended to balance moulding with lifting strength.
Why practitioners choose VOM
Light, Intensive and Volume cover fine to medium lines, deeper folds and volume from one Korean product family.
The gel is described as multi-layered, with a gel layer around the particles, intended to balance easy moulding with lifting strength.
The gels contain 0.3% lidocaine to reduce discomfort during injection.
CG Bio makes the range with its own R2 technology, which it describes as increasing the stability of the HA.
The old listing gives effects of up to about 12 months, depending on the gel and the area treated.
Treatment areas and indications
Areas where the gels in the VOM range are used. Approved indications and age limits differ by market, so follow the instructions for use for the gel and your country.
Lines treated in the mid dermis.
Fine lines around the lips and lip definition.
Deeper folds and lines, injected into the deep dermis.
Volume and contouring of the cheeks.
Volume and contouring of the chin.
VOM gels are medical devices for injection. Which indications are permitted and what training is required are set by the regulatory framework where you practise. Korea Filler Experts supplies the product. Nothing here is a recommendation to treat any medical condition, and nothing here replaces manufacturer training.
What is inside VOM
| Product type | Multi-layered cross-linked hyaluronic acid dermal filler with lidocaine |
| Hyaluronic acid | Cross-linked HA, 20 mg/mL |
| Lidocaine | 0.3% |
| Gels on this listing | Light, Intensive, Volume |
| Technology | R2 (CG Bio) |
| Depth (distributor listings) | Light mid dermis, Intensive deep dermis, Volume subcutaneous |
| Duration (listing) | Up to about 12 months, depending on the gel and area |
| Storage | As stated on the carton; do not freeze; protect from direct sunlight |
| Manufacturer | CG Bio, South Korea |
Before you order
- Choose the variation (Light, Intensive or Volume) before adding to your cart.
- Check the lot number and expiry on the carton against the syringe.
- We do not dispatch stock with under 6 months of shelf life remaining unless agreed in advance.
- Check the ingredient list on the carton before you plan treatment.
- Indications and approvals differ by country, so confirm what you may import and use where you practise.
Quantity discounts apply at five, ten and twenty units.
What each component does
Cross-linked hyaluronic acid, 20 mg/mL
Hyaluronic acid is a sugar found naturally in skin, where it binds water. In a filler it is cross-linked so that it lasts longer than natural HA before the body breaks it down. VOM is listed at 20 mg/mL, and the three gels differ in how firm they are.
Lidocaine, 0.3%
Lidocaine hydrochloride at 0.3% is included for comfort during injection. It is a local anaesthetic. Screen patients for lidocaine allergy, and check the carton to confirm the ingredients of your syringe.
Multi-layered gel and R2
The gel is described as multi-layered, with a gel layer around the HA particles. R2 is CG Bio’s name for its manufacturing process. These are the manufacturer’s descriptions, and we do not hold independent data on them.
Which gel for which area
- Light: fine to medium lines, injected into the mid dermis.
- Intensive: deeper lines such as the nasolabial folds, injected into the deep dermis.
- Volume: volume and contouring in the cheeks and chin, injected into the subcutaneous layer.
Approved indications differ by market. Confirm them in the instructions for use for your country.
How it works
The gel is placed in the skin or deeper tissue, where it adds volume mechanically and binds water. The cross-linking slows its breakdown, and the body gradually absorbs it over months.
How VOM is used
Reference information for trained practitioners. The manufacturer’s instructions for use for the specific gel and your training take precedence over this page.
Step by step
-
Assess and consent
Review medical history, allergies (including to lidocaine), medication, bleeding risk, previous fillers and the patient’s goals. Explain the expected result, the risks and the possibility of needing hyaluronidase.
-
Choose the gel
Select Light, Intensive or Volume according to the area, depth and result needed, following the instructions for use.
-
Prepare the skin
Remove make-up and cleanse. Mark the treatment area and apply topical anaesthetic if required.
-
Inspect the syringe
Check the packaging, seal and expiry. Use the sterile needle supplied or a needle or cannula recommended in the instructions for use.
-
Inject as taught
Light is injected into the mid dermis, Intensive into the deep dermis and Volume into the subcutaneous layer, using the technique in the instructions for use and your training. Inject slowly and with low pressure, and stop at once if the patient reports unexpected pain or you see blanching.
-
Review
Assess the result, mould gently if the technique requires it, and plan any review according to the gel used and the area treated. Volume effects are visible straight after injection.
Administration notes
Know the risks of the area. Filler can cause vascular occlusion. Practitioners should know the anatomy of the area, recognise the signs early and have hyaluronidase and an emergency protocol immediately available.
- Single use. One syringe, one patient. Discard any remainder with the needle.
- Do not inject into infected, inflamed or broken skin.
- Do not use in patients allergic to hyaluronic acid or lidocaine.
- Dispose of needles into a sharps container in line with local clinical waste rules.
After treatment
- Redness, swelling, tenderness and bruising are common and settle within days
- Avoid strenuous exercise, heat, saunas and alcohol for about 24 to 48 hours
- Seek urgent review for severe pain, blanching, skin colour change, visual change or a lump that grows or becomes tender
Storing and handling VOM
Store as stated on the carton and in the instructions for use. Do not freeze. Protect from direct sunlight.
Keep the syringe in its original sterile packaging until use. Check the seal and expiry. Do not use if the packaging is damaged.
Single patient, single session. Discard the syringe and needle after use.
Do not use if the packaging is damaged or the expiry date has passed. Dispose of used syringes and needles as clinical waste in line with local requirements.
What's included with VOM
Ask us if you need the exact pack contents before you order. Topical anaesthetic and hyaluronidase are not supplied.
VOM — frequently asked questions
What is VOM?
A range of multi-layered, cross-linked hyaluronic acid dermal fillers from CG Bio in South Korea, listed at 20 mg/mL with 0.3% lidocaine. This listing carries Light, Intensive and Volume.
What is the difference between Light, Intensive and Volume?
Each gel has a different firmness and injection depth. Light is for fine to medium lines in the mid dermis. Intensive is for deeper lines in the deep dermis. Volume is the firmest gel, placed in the subcutaneous layer for volume and contouring.
What does multi-layered mean?
The gel is described as having a gel layer around the HA particles. The design is intended to balance easy moulding with lifting strength. This is the manufacturer’s description.
What is R2?
R2 is CG Bio’s name for its manufacturing technology for the range. We do not hold independent data on it.
Does VOM contain lidocaine?
Yes. The gels contain 0.3% lidocaine to reduce discomfort during injection.
How long do the results last?
Our listing gives up to about 12 months. Duration varies with the gel, the injection depth, the area and the patient, so treat this as a manufacturer-style figure.
Can it be dissolved?
Yes. Hyaluronic acid fillers can be broken down with hyaluronidase. Practitioners should have it available.
Who can buy and use this product?
Dermal fillers are for administration by licensed healthcare practitioners trained in injection technique. We supply qualified professionals and do not sell to consumers.
Copyright 2026 © Korea Filler Experts. All right reserved.
