Hutox 100UI
Clostridium botulinum toxin type A · 100 units · lyophilised powder, single-dose vial. Manufactured by Huons Biopharma, South Korea.
$54.90
You save
- Hutox 100UI is a 99.8%-pure botulinum toxin type A from Huons Biopharma — the export-market version of Liztox. It suits facial wrinkle correction, hyperhidrosis, and therapeutic applications, with results lasting 4–6 months.
Professional use only. This product is intended for administration by licensed healthcare practitioners trained in the relevant anatomy and injection technique. By ordering you confirm you are authorised to purchase and handle products of this class in your jurisdiction. Availability and permitted use vary by country — please verify local regulations before ordering.
In accordance with applicable U.S. FDA regulations, this product is not available for purchase or shipment to U.S. addresses through this website. Customers in the United States should obtain botulinum toxin products through appropriately licensed and authorized U.S. distribution channels. A valid medical license or registration certificate is required to process any product-related claim.
Did you like this product? Add to favorites now and follow the product.

(+82) 10 7364 7998 Send a message on WhatsApp.
A conventional lyophilised toxin from Huons Biopharma
Hutox is a botulinum toxin type A product from Huons Biopharma, supplied as a sterile lyophilised powder in a single 100-unit vial and reconstituted with preservative-free 0.9% sodium chloride before use.
It is a straightforward, conventional formulation: botulinum toxin type A stabilised with human serum albumin, with sodium chloride for tonicity. No unusual handling, no special storage, no retraining — it behaves exactly as a practitioner familiar with this category would expect.
That is the honest case for it. Where a product like Coretox is chosen for an albumin-free formulation or Innotox for being ready to use, Hutox competes on being conventional and well-priced. For a clinic whose technique is already settled, there is something to be said for a product that introduces no new variables.
Huons Biopharma also manufactures Liztox. If you stock both, they come from the same maker.
Botulinum toxin type A with human serum albumin and sodium chloride — nothing unusual in handling or storage.
Both come from Huons Biopharma, so supply and documentation run through one manufacturer.
Supplied as a powder, so concentration is chosen at the bench to suit the treatment area.
Slots into an established workflow without changing preparation, storage or technique.
Why practitioners choose Hutox 100UI
A conventional lyophilised toxin that prepares, stores and injects the way practitioners in this category already work.
Huons Biopharma is part of a long-standing Korean pharmaceutical group and also produces Liztox.
Supplied as a powder rather than a solution, so concentration is set at the bench to suit the treatment area.
Single 100-unit vial per carton, standard 2–8 °C storage, no special requirements.
Aesthetic & therapeutic applications
Areas commonly treated with this product. Approval status differs between markets — always work from the prescribing information registered in the country where you practise.
Lines produced by corrugator and procerus activity. The main technical caution is placement: injecting too low or too close to the orbital rim risks spread toward the levator and a temporary lid ptosis, which is why this area rewards precise placement rather than generous dosing.
Lines at the outer eye produced by orbicularis oculi activity. Widely treated in aesthetic practice; whether it is an approved indication for this product depends on your market.
Horizontal lines from frontalis activity. A conventional formulation gives you full control of dilution here, which matters when working at low doses across multiple points.
Masseter and platysma treatment for muscle contouring. Approval status varies widely by country and this is frequently a practitioner-led application rather than a labelled indication.
Botulinum toxin products are prescription-only medicines. Any use outside the indications approved in your jurisdiction is a clinical decision made by the treating practitioner under their own professional judgement and local regulatory framework. Korea Filler Experts supplies the product; nothing here should be read as a recommendation to treat any medical condition.
What is inside Hutox 100UI
| Active substance | Clostridium botulinum toxin type A |
| Strength | 100 Units per vial |
| Stabiliser | Human serum albumin, 0.5 mg |
| Tonicity agent | Sodium chloride, 0.9 mg |
| Pharmaceutical form | Lyophilised powder for solution for injection |
| Diluent | Preservative-free 0.9% sodium chloride injection (not supplied) |
| Container | Single-use glass vial |
| Route | Intramuscular injection |
| Manufacturer | Huons Biopharma, South Korea |
| Regulatory class | Prescription-only medicine (professional use) |
Reading the carton
Before you accept a delivery, check four things:
- The lot / batch number on the carton matches the number printed on the vial.
- The expiry date leaves you enough working life — we do not dispatch stock with under 6 months remaining unless agreed in advance.
- The seal is intact and the vial has not been disturbed.
- The carton arrived cold, with the coolant pack still chilled.
Vial looks empty? The contents are freeze-dried under vacuum, so the powder forms a thin film that is hard to see against the glass. This is expected and is not a sign of a short fill.
What each component does
- Botulinum toxin type A — the active substance. It temporarily reduces the release of acetylcholine at the neuromuscular junction, lowering activity in the injected muscle.
- Human serum albumin — stabilises the toxin protein through freeze-drying, storage and reconstitution. This is a human blood derivative; if a patient raises that specifically, an albumin-free product such as Coretox or Innotox is the alternative.
- Sodium chloride — brings the reconstituted solution to a tonicity suitable for injection.
How to prepare and use Hutox 100UI
Reference information for licensed practitioners. Reconstitution and administration must follow the prescribing information approved in your market and your own clinical governance procedures.
Step by step
-
Inspect the vial
Check the label, lot number and expiry date, and confirm the seal is intact.
-
Prepare the diluent
Draw the required volume of preservative-free 0.9% sodium chloride injection into a sterile syringe.
-
Disinfect the stopper
Wipe the exposed rubber stopper with an alcohol swab and allow it to dry.
-
Introduce the diluent slowly
Insert the needle at an angle and let the vacuum draw the saline in. Direct the stream against the vial wall rather than onto the powder.
-
Mix gently
Rotate the vial slowly to dissolve the cake. Do not shake vigorously. The solution should be clear, colourless and free of particulates.
-
Record and use promptly
Note the reconstitution date and time on the vial, store at 2–8 °C, and use within the period stated in your approved prescribing information.
Dilution reference
| Diluent added | Units per 0.1 mL | Total volume |
|---|---|---|
| 1.0 mL | 10.0 U | 1.0 mL |
| 2.0 mL | 5.0 U | 2.0 mL |
| 2.5 mL | 4.0 U | 2.5 mL |
| 4.0 mL | 2.5 U | 4.0 mL |
| 5.0 mL | 2.0 U | 5.0 mL |
Administration notes
Materials needed: preservative-free 0.9% sterile saline, a sterile syringe with a fine-gauge needle, gloves and alcohol swabs. None of these are supplied with the vial.
- Units of botulinum toxin are product-specific. Do not convert or substitute units between brands — including between Hutox and Liztox, despite the shared manufacturer.
- Dose per site, total dose and injection technique must follow the prescribing information approved in your market.
- Draw reconstituted product immediately before injection.
- Treatment intervals should not be shortened below the minimum stated in the prescribing information.
After treatment
- Avoid rubbing or massaging the treated area for at least 24 hours
- Stay upright and avoid lying down for 4 to 6 hours
- Avoid strenuous exercise for 24 to 48 hours
- Avoid saunas, hot tubs and excessive sun exposure for at least 24 hours
- Mild redness, swelling or bruising can occur and usually settles within a few days
Storing and handling Hutox 100UI
Store refrigerated at 2–8 °C in the original carton, protected from light. Do not freeze. Always work to the expiry date printed on the carton.
Keep at 2–8 °C and use within the period stated in your approved prescribing information. Do not freeze reconstituted solution. Single-patient use only.
Transfer stock into a monitored medical refrigerator on arrival and keep a temperature log. If a shipment arrives warm, photograph the packaging and contact us before putting it into clinical service.
Do not use the vial if the powder is discoloured, if the reconstituted solution is cloudy or contains particles, if the expiry date has passed, or if the cold chain is known to have been broken. Dispose of unused product and used vials as clinical waste in line with local requirements.
What's included with Hutox 100UI
Diluent (0.9% sodium chloride injection), syringes and needles are not supplied with this product and must be sourced separately.
Hutox 100UI — frequently asked questions
What is Hutox 100UI?
Hutox 100UI is a botulinum toxin type A product manufactured by Huons Biopharma in South Korea. It is supplied as a sterile freeze-dried powder in a single 100-unit vial and reconstituted with preservative-free 0.9% sodium chloride before injection by a licensed practitioner.
How does Hutox differ from Liztox?
Both come from Huons Biopharma. Hutox is the conventional formulation — botulinum toxin type A stabilised with human serum albumin. Huons describes Liztox as a 150 kDa preparation free from complexing proteins, a claim not made for Hutox.
If that distinction matters to your purchasing decision, ask us for a photograph of each insert before ordering.
What makes this a good choice?
Its ordinariness, which is a genuine advantage. It prepares, stores and injects exactly as practitioners in this category already expect, so it introduces no new variables into a settled technique — and it is priced accordingly.
Does it contain human serum albumin?
Yes, 0.5 mg per vial, used as the stabiliser. Albumin is a human blood derivative. If a patient raises that specifically, Coretox and Innotox are albumin-free alternatives we also supply.
Why does the vial look empty?
The contents are freeze-dried under vacuum, so 100 units of active substance form a very thin, almost transparent film in the vial. This is normal and is not a sign of a short fill. The powder becomes obvious once saline is introduced.
Can I substitute Hutox units for another brand's units?
No — and that includes Liztox, despite the shared manufacturer. Units of botulinum toxin are specific to each product and are not interchangeable. Dosing must be taken from the prescribing information for the product in your hand.
What shelf life will my stock have?
We do not dispatch stock with less than six months of remaining shelf life unless you have specifically agreed to it. If you need a particular expiry window, tell us before you order and we will allocate accordingly.
What happens if my shipment arrives warm?
Do not use it. Photograph the outer box, the insulated liner, the coolant packs and the vial carton, and contact us the same day with your order number. We will review the cold-chain evidence and arrange a replacement where the failure occurred in transit.
Who is allowed to buy this product?
Botulinum toxin is a prescription-only medicine. Purchase and use are restricted to licensed healthcare professionals qualified to prescribe or administer injectable prescription medicines in their jurisdiction, with appropriate training in the relevant anatomy and injection technique. We do not sell to consumers.


